EasyManua.ls Logo

Husqvarna TC 85 User Manual

Husqvarna TC 85
131 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
3 IMPORTANT NOTES
10
3.1 Manufacturer and implied warranty
The work prescribed in the service schedule must be carried out by an authorized Husqvarna Motorcycles
workshop only and confirmed both in the customer's Service & Warranty Booklet and in the Husqvarna Motor-
cycles Dealer.net; otherwise, all warranty claims will be void. Damage or secondary damage caused by tam-
pering with and/or conversions on the vehicle are not covered by the warranty.
Additional information on the manufacturer or implied warranty and the procedures involved can be found in
the Service & Warranty Booklet.
3.2 Operating and auxiliary substances
Warning
Environmental hazard Improper handling of fuel is a danger to the environment.
– Do not allow fuel to enter the groundwater, the soil, or the sewage system.
Use operating and auxiliary substances (such as fuel and lubricants) as specified in the Owner's Manual.
3.3 Spare parts, accessories
For the safety of your child, only use spare parts and accessory products that are approved and/or recom-
mended by Husqvarna Motorcycles and have them installed by an authorized Husqvarna Motorcycles work-
shop. Husqvarna Motorcycles accepts no liability for other products and any resulting damage or loss.
Certain spare parts and accessory products are specified in parentheses in the descriptions. Your authorized
Husqvarna Motorcycles dealer will be glad to advise you.
The current Husqvarna Motorcycles accessories for your vehicle can be found on the Husqvarna Motorcycles
website.
International Husqvarna Motorcycles website: www.husqvarna-motorcycles.com
3.4 Service
A prerequisite for perfect operation and prevention of premature wear is that the service, care, and tuning work
on the engine and chassis is properly carried out as described in the Owner's Manual. Incorrect adjustment
and tuning of the engine and chassis can lead to damage and breakage of components.
Use of the vehicle under difficult conditions, such as on sand or on wet and muddy surfaces, can lead to con-
siderably more rapid wear of components such as the drive train, brake system, or suspension components.
For this reason, it may be necessary to inspect or replace parts before the next scheduled service.
It is imperative that you adhere to the stipulated run-in times and service intervals. If you observe these exactly,
you will ensure a much longer service life for your motorcycle.
3.5 Figures
The figures contained in the manual may depict special equipment.
In the interest of clarity, some components may be shown disassembled or may not be shown at all. It is not
always necessary to disassemble the component to perform the activity in question. Please follow the instruc-
tions in the text.

Table of Contents

Questions and Answers:

Husqvarna TC 85 Specifications

General IconGeneral
StarterKickstarter
Transmission6-speed
Engine TypeSingle-cylinder, 2-stroke
Displacement84.9 cc
ClutchWet multi-disc
Front BrakeDisc brake
Rear BrakeDisc brake
Front Tire70/100
Rear Tire90/100
Wheelbase1290 mm
Final DriveChain

Summary

Safety Advice

Intended Use and Misuse

Defines how the vehicle should and should not be used to prevent danger.

Degrees of Risk and Symbols

Explains the different levels of risk and associated warning symbols used in the manual.

Safe Operation

Guidelines for operating the vehicle safely, covering risks and precautions.

Important Notes

Manufacturer Warranty and Service

Information on warranty validity, service requirements, and authorized workshops.

Customer Service

Information on how to contact authorized dealers for support and questions.

Controls

Handlebar Controls

Identifies and describes the function of levers and switches on the handlebar.

Levers and Starting Aids

Describes the function and operation of foot brake, kick starter, and plug-in stand.

Preparing for Use

Advice on First Use

Key considerations and warnings for a child's first ride on the motorcycle.

Engine Break-in

Instructions for the initial running-in phase of the engine for optimal performance.

Riding Conditions Preparation

Guidance on preparing the vehicle for various riding conditions like sand or mud.

Riding Instructions

Pre-ride Checks

Essential checks to perform before every trip to ensure safe operation.

Starting and Shifting

Procedures for starting the engine and properly shifting gears.

Braking and Stopping

Proper techniques for applying brakes and stopping the vehicle safely.

Service Schedule

Required Work

Lists essential maintenance tasks and their intervals for regular upkeep.

Recommended Work

Suggests additional maintenance tasks for optimal vehicle longevity.

Tuning the Chassis

Basic Chassis Setting

How to set up the chassis based on rider weight for optimal handling.

Fork Adjustment

Procedures for adjusting fork air pressure and compression damping.

Shock Absorber Adjustment

Instructions for adjusting compression and rebound damping of the shock absorber.

Service Work on the Chassis

Fork Procedures

Steps for removing, installing, and maintaining fork components.

Chain Maintenance

Steps for cleaning, checking tension, and maintaining the drive chain.

Brake System Procedures

Instructions for checking and maintaining brake fluid and linings.

Tuning the Engine

Throttle Cable Adjustment

Procedure for adjusting the play in the throttle cable for smooth operation.

Carburetor Setting

Details on adjusting carburetor settings for optimal engine performance.

Service Work on the Engine

Gear Oil Maintenance

Procedures for checking and changing engine gear oil.

Cleaning, Care

Cleaning the Motorcycle

Guidelines for washing and maintaining the motorcycle's appearance.

Troubleshooting

Common Faults and Solutions

Identifies common problems and provides steps to resolve them.

Technical Data

Engine Specifications

Key technical details about the motorcycle's engine.

Chassis Data

Specifications related to the motorcycle's frame, suspension, and wheels.

Related product manuals