21 SUBSTANCES
121
Brake fluid DOT 4
Standard/classification
– DOT
Guideline
– Use only brake fluid that complies with the specified standard (see specifications on the container) and that
possesses the corresponding properties.
Recommended supplier
Bel‑Ray
®
– Super DOT 4 Brake Fluid
Coolant
Guideline
– Only use high-grade, silicate-free coolant with corrosion inhibitor additive for aluminum motors. Low grade
and unsuitable antifreeze causes corrosion, deposits and frothing.
– Do not use pure water as only coolant is able to meet the requirements needed in terms of corrosion pro-
tection and lubrication properties.
– Only use coolant that complies with the requirements stated (see specifications on the container) and that
has the relevant properties.
Antifreeze protection to at least −25 °C (−13 °F)
The mixture ratio must be adjusted to the necessary antifreeze protection. Use distilled water if the coolant
needs to be diluted.
The use of premixed coolant is recommended.
Observe the coolant manufacturer specifications for antifreeze protection, dilution and miscibility (compatibility)
with other coolants.
Recommended supplier
Bel‑Ray
®
– Moto Chill Racing Coolant
Engine oil (SAE 10W/40)
Standard/classification
– JASO T903 MA ( p. 124)
– SAE ( p. 124) (SAE 10W/40)
Guideline
– Use only engine oils that comply with the specified standards (see specifications on the container) and that
possess the corresponding properties.
mineral engine oil
Recommended supplier
Bel‑Ray
®
– EXL Mineral 4T
Engine oil, 2-stroke
Standard/classification
– JASO FD ( p. 124)
Guideline
– Only use high grade 2-stroke engine oil of a reputable brand.
Synthetic engine oil
To Next Page
Loading...
Need help?
General
