Husqvarna TC 85 User Manual

11 SERVICE WORK ON THE CHASSIS
59
V00883-10
Main work
–
Remove screws
1
.
–
Take off outer tube
2
.
–
Remove glass fiber yarn filling
3
from inner tube
4
.
– Clean the parts that need to be reinstalled and check for
damage.
– Mount the new glass fiber yarn filling on the inner tube.
Info
Mount the glass fiber yarn filling so that the thermal
protection foil is positioned on the right in the direction
of travel.
– Slide outer tube over the inner tube with the new glass fiber
yarn filling.
– Mount and tighten the screws.
Guideline
Screw, main silencer M5 7 Nm (5.2 lbf ft)
Finishing work
– Install the main silencer. ( p. 58)
– Install the right side cover. ( p. 60)
11.30 Removing the right side cover
K00980-10
–
Pull off the side cover sideways in areas
A
and
B
, and
remove toward the front.

Husqvarna TC 85 Specifications

General

Starter	Kickstarter
Transmission	6-speed
Engine Type	Single-cylinder, 2-stroke
Displacement	84.9 cc
Clutch	Wet multi-disc
Front Brake	Disc brake
Rear Brake	Disc brake
Front Tire	70/100
Rear Tire	90/100
Wheelbase	1290 mm
Final Drive	Chain