Handling the touchscreen
The touchscreen responds to a light finger touch on the screen. Use only a stylus or a clean
finger to interact with the touchscreen. Using sharp or metallic objects will cause damage.
If the touchscreen is:
Left unattended, the screens will step back one screen at a time in 10-minute intervals.
The pop-up windows will also step back automatically in 2-minute intervals.
Not activated for a user-defined period (10 minutes by default), the Home screen dims
to save power.
Controller's USB port
Be aware that the USB port is not designed to power user devices that require and draw high
amperage. Rather, it is designed for software updates and for downloading log error text files.
Powering such devices via the USB port may result in a blank controller screen, and thus
require a system reboot.
Power saving
The Backlight setting is a power saving feature. Use the slide bar to set the screen backlight
level (brightness). Also, you can program the screen to dim after a specified time of touchless
interaction.
To Next Page
Loading...
Need help?
General
