ARB Subsystem
Copyright © ITECH Electronic Co., Ltd. 83
Example
LIST:RCL "test.csv"
LIST:STEP:COUNt?
This command is used to query the total number of steps in the list.
Syntax:
LIST:STEP:COUNt?
Returns:
<NR1>
Example
LIST:STEP:COUNt?
LIST:CLEar
This command is used to clear the list configuration.
Syntax:
LIST:CLEar
Example
LIST:CLE
LIST:STEP <NR1>,<string>
This command is used to configure and query the list step parameters.
<NR1>: step index
<string>: the parameters are separated by commas, and the specific order is as
follows:
Three phase:
IAC_A 0
IAC_B 1
IAC_C 2
IAC_SLEW_A 3
IAC_SLEW_B 4
IAC_SLEW_C 5
IDC_A 6
IDC_B 7
IDC_C 8
IDC_SLEW_A 9
IDC_SLEW_B 10
To Next Page
Loading...
Need help?
General
