ITech IT8200 Series Programming Guide

FETCh & MEASure Subsystem
Copyright © ITECH Electronic Co., Ltd. 38
FETCh[:SCALar]:POWer:APParent?
MEASure[:SCALar]:POWer:APParent?
This command is used to read the apparent power value.
Note: this command parameter is optional. If there is no parameter, it will return
the value of A, B, C three-phase by default.
Syntax:
FETCh[:SCALar]:POWer:APParent? [A|B|C]
MEASure[:SCALar]:POWer:APParent? [A|B|C]
Arguments
[A|B|C]
Returns:
<NRf>…
Example
FETC:POW:APP?
FETCh[:SCALar]:POWer:REACtive?
MEASure[:SCALar]:POWer:REACtive?
This command is used to read the reactive power value.
Note: this command parameter is optional. If there is no parameter, it will return
the value of A, B, C three-phase by default.
Syntax:
FETCh[:SCALar]:POWer:REACtive? [A|B|C]
MEASure[:SCALar]:POWer:REACtive? [A|B|C]
Arguments
[A|B|C]
Returns:
<NRf>…
Example
FETC:POW:REAC?

ITech IT8200 Series Specifications

General

Brand	ITech
Model	IT8200 Series
Category	Measuring Instruments
Language	English