Name: ITech IT8200 Series
Brand: ITech
Rating: 4 (1 reviews)

To Next Page

To Previous Page

CONFigurate IO Subsystem

Query syntax

IO:TOUT:SOURce? <CPD>

Returns

<CPD>

Example

IO:TOUT:SOURce ON

[CONFigurable:]IO:STATe <NR1>,<CPD>

When IO is set to output mode, it can output high level (False) or low level (True).

This command is used to set and query the output level status, 0 means FALSE, 1

means True.

Syntax

[CONFigurable:]IO:STATe <NR1>,<CPD>

Argument

NR1:[1,7]

CPD:0|OFF|1|ON

Query syntax

[CONFigurable:]IO:STATe?

Example

IO:STATe 1,ON

default chapter3
- Limitation of Warranty3
- Safety Symbols3
- Warranty3
- Environmental Conditions4
- Regulatory Markings5
- Compliance Information6
- Table of Contents7
Chapter1 SCPI Introduction13
- 1.1 Overview13
- 1.4 Response Data Type16
- 1.5 Command Format17
- 1.6 Data Type19
- 1.7 Remote Interface Connection20
- Command Type of SCPI21
Chapter2 SCPI Status Register22
- Message Type of SCPI23
Chapter3 System Commands24
- System:preset24
- System:posetup <CPD25
- System:clear25
Chapter4 Channel Subsystem35
Chapter5 Abort Subsystem36
- Abort:acquire36
- Abort:list36
- Abort:sweep36
- Abort:surgesag36
Chapter6 Initiate Subsystem37
- Initiate[:Immediate]:Acquire37
- Initiate[:Immediate]:List37
- Initiate[:Immediate]:Sweep37
- Initiate[:Immediate]:Surgesag37
Chapter7 Configurate IO Subsystem38
- [Configurable:]Io:select <NR138
- [Configurable:]Io:reverse <NR1>,<CPD38
- [Configurable:]Io:type <NR1>,<CPD39
- [Configurable:]Io:tout:source <CPD1>,<CPD239
- [Configurable:]Io:state <NR1>,<CPD40
Chapter8 Trigger Subsystem41
- Trigger:list:source <Source41
- Trigger:sweep:source <CPD41
- Trigger:surgesag:source <CPD42
- Trigger:scope:source <CPD42
- Trigger:scope:mode <CPD42
- Trigger:scope:slope <CPD143
- Trigger:force43
Chapter9 Parallel Subsystem44
- Parallel:role <Role44
- Parallel:number <Number44
- Parallel:node:number45
Chapter10 Scope Subsystem46
- Scope:auto46
- Scope:run46
- Scope:single46
- Scope:stop46
- Scope:timebase:scale <Nrf46
- Scope:voltage:scale <Nrf47
- Scope:current:scale <Nrf47
- Scope:timebase:delay <Nrf48
- Scope:trigger:source48
- Scope:trigger:level <Nrf49
- Scope:trigger:slope <CPD49
- Scope:trigger:mode <CPD49
- Scope:line:selection50
- Scope:status50
- Scope:rstate50
- Scope:waveform:data51
- Scope:range:catalog51
- Scope:record:length <0.6|6|60|60051
- Scope:sample:mode <Normal|Peak52
- Scope:data:tag52
Chapter11 Fetch & Measure Subsystem53
- Fetch[:Scalar]:Current[:Ac]53
- Measure[:Scalar]:Current[:Ac]53
- Fetch[:Scalar]:Current:DC53
- Measure[:Scalar]:Current:DC53
- Fetch[:Scalar]:Current[:Ac][:Amplitude]:Maximum:positive54
- Measure[:Scalar]:Current[:Ac][:Amplitude]:Maximum:positive54
- Fetch[:Scalar]:Current[:Ac][:Amplitude]:Maximum:negative54
- Measure[:Scalar]:Current[:Ac][:Amplitude]:Maximum:negative54
- Fetch[:Scalar]:Current[:Ac][:Amplitude]:Maximum55
- Measure[:Scalar]:Current[:Ac][:Amplitude]:Maximum55
- Fetch[:Scalar]:Voltage[:Ac][:Amplitude]:Maximum:hold55
- Measure[:Scalar]:Voltage[:Ac][:Amplitude]:Maximum:hold55
- Fetch[:Scalar]:Voltage[:Ac][:Amplitude]:Maximum:hold:clear56
- Measure[:Scalar]:Voltage[:Ac][:Amplitude]:Maximum:hold:clear56
- Fetch[:Scalar]:Current:cfactor56
- Measure[:Scalar]:Current:cfactor56
- Fetch[:Scalar]:Frequency57
- Measure[:Scalar]:Frequency57
- Fetch[:Scalar]:Power[:Real]57
- Measure[:Scalar]:Power[:Real]57
- Fetch[:Scalar]:Power:apparent58
- Measure[:Scalar]:Power:apparent58
- Fetch[:Scalar]:Power:reactive58
- Measure[:Scalar]:Power:reactive58
- Fetch[:Scalar]:Power:pfactor59
- Measure[:Scalar]:Power:pfactor59
- Fetch[:Scalar]:Voltage[:Ac]59
- Measure[:Scalar]:Voltage[:Ac]59
- Fetch[:Scalar]:Voltage:DC60
- Measure[:Scalar]:Voltage:DC60
- Fetch[:Scalar]:Voltage[:Ac][:Amplitude]:Maximum60
- Measure[:Scalar]:Voltage[:Ac][:Amplitude]:Maximum60
- Fetch[:Scalar]:Voltage[:Ac][:Amplitude]:Maximum:positive61
- Measure[:Scalar]:Voltage[:Ac][:Amplitude]:Maximum:positive61
- Fetch[:Scalar]:Voltage[:Ac][:Amplitude]:Maximum:negative61
- Measure[:Scalar]:Voltage[:Ac][:Amplitude]:Maximum:negative61
- Fetch[:Scalar]61
- Measure[:Scalar]61
- Fetch[:Scalar]:Power[:Real]:Total62
- Measure[:Scalar]:Power[:Real]:Total62
- Fetch[:Scalar]:Power:apparent:total63
- Measure[:Scalar]:Power:apparent:total63
- Fetch[:Scalar]:Power:reactive:total63
- Measure[:Scalar]:Power:reactive:total63
- Fetch[:Scalar]:Ltlvoltage[:Ac]63
- Measure[:Scalar]:Ltlvoltage[:Ac]63
- Fetch[:Scalar]:Voltage:harmonic[:Amplitude]? <[A|B|C]>,<NR164
- Measure[:Scalar]:Voltage:harmonic[:Amplitude]? <[A|B|C]>,<NR164
- Fetch[:Scalar]:Current:harmonic[:Amplitude]? <[A|B|C|CH1|CH2|CH3]>,<NR164
- Measure[:Scalar]:Current:harmonic[:Amplitude]? <[A|B|C|CH1|CH2|CH3]>,<NR164
- Fetch[:Scalar]:Voltage:harmonic:distort? <[A|B|C]>,<NR165
- Measure[:Scalar]:Voltage:harmonic:distort? <[A|B|C]>,<NR165
- Fetch[:Scalar]:Current:harmonic:distort? <[A|B|C]>,<NR166
- Measure[:Scalar]:Current:harmonic:distort? <[A|B|C]>,<NR166
- Fetch[:Scalar]:Voltage:harmonic:phase? <[A|B|C]>,<NR166
- Measure[:Scalar]:Voltage:harmonic:phase? <[A|B|C]>,<NR166
- Fetch[:Scalar]:Current:harmonic:phase? <[A|B|C]>,<NR167
- Measure[:Scalar]:Current:harmonic:phase? <[A|B|C]>,<NR167
- Fetch[:Scalar]:Voltage:harmonic:thd? <[A|B|C]67
- Measure[:Scalar]:Voltage:harmonic:thd? <[A|B|C]67
- Fetch[:Scalar]:Current:harmonic:thd? <[A|B|C]68
- Measure[:Scalar]:Current:harmonic:thd? <[A|B|C]68
- Fetch[:Scalar]:Array:voltage:harmonic[:Amplitude]? <[A|B|C]>,<NR168
- Measure[:Scalar]:Array:voltage:harmonic[:Amplitude]? <[A|B|C]>,<NR168
- Fetch[:Scalar]:Array:current:harmonic[:Amplitude]? <[A|B|C]>,<NR169
- Measure[:Scalar]:Array:current:harmonic[:Amplitude]? <[A|B|C]>,<NR169
- Fetch[:Scalar]:Array:voltage:harmonic:phase? <[A|B|C]>,<NR169
- Measure[:Scalar]:Array:voltage:harmonic:phase? <[A|B|C]>,<NR169
- Fetch[:Scalar]:Array:current:harmonic:phase? <[A|B|C]>,<NR170
- Measure[:Scalar]:Array:current:harmonic:phase? <[A|B|C]>,<NR170
- Fetch[:Scalar]:Array:voltage:harmonic:distort? <[A|B|C|CH1|CH2|CH3]>,<NR170
- Measure[:Scalar]:Array:voltage:harmonic:distort? <[A|B|C|CH1|CH2|CH3]>,<NR170
- Fetch[:Scalar]:Array:current:harmonic:distort? <[A|B|C|CH1|CH2|CH3]>,<NR171
- Measure[:Scalar]:Array:current:harmonic:distort? <[A|B|C|CH1|CH2|CH3]>,<NR171
- Vetcor:oeder <NR171
- Vetcor:data72
- Vetcor:type <CPD72
Chapter12 SENSE Subsystem73
- Sense[:Remote][:State] <CPD73
- Sense:filter[:State] <CPD73
- Sense:filter:level <CPD74
- Sense:external:sync[:State] <Boolean74
- Sense:external:sync:phase <Nrf74
- Sense:external:sync:difference <Cpd>,<Nrf75
Chapter13 Load Protect Subsystem76
- [Source:]Current:protection:state <Boolean76
- [Source:]Current:protection[:Level] <Nrf76
- [Source:]Current:protection:delay <Nrf77
- [Source:]Current:peak:protection[:Level] <Nrf78
- [Source:]Current:peak:protection:delay <Nrf78
- [Source:]Power:protection:state <Boolean79
- [Source:]Power:protection[:Level] <Nrf79
- [Source:]Power:protection:delay <Nrf79
- [Source:]Voltage:under:protection:state <Boolean80
- [Source:]Voltage:under:protection[:Level] <Nrf80
- [Source:]Voltage:under:protection:delay <Nrf81
- [Source:]Voltage:peak:protection[:Level] <Nrf81
Chapter14 Source Subsystem82
- [Source:]Function <CPD182
- [Source:]Function:catalog83
- [Source:]Upfactor[:State] <Boolean83
- [Source:]Current[:Level][:Immediate][:Amplitude][:Ac] <Nrf+>[,Nrf+][,Nrf+]83
- [Source:]Current[:Level][:Immediate][:Amplitude]:DC <Nrf+>,[Nrf+],[Nrf+]84
- [Source:]Current:slew[:Ac] <Nrf+>[,Nrf+][,Nrf+]84
- [Source:]Current:slew:DC <Nrf85
- [Source:]Resistance[:Level][:Immediate][:Amplitude] <Nrf+>[,Nrf+][,Nrf+]85
- [Source:]Power[:Level][:Immediate][:Amplitude] <Nrf+>[,Nrf+][,Nrf+]85
- [Source:]Kva[:Level][:Immediate][:Amplitude] <Nrf+>[,Nrf+][,Nrf+]86
- [Source:]Pshift[:Level][:Immediate][:Amplitude] <Nrf+>[,Nrf+][,Nrf+]86
- [Source:]Cfactor[:Level][:Immediate][:Amplitude] <Nrf+>[,Nrf+][,Nrf+]87
- [Source:]Voltage[:Level][:Immediate][:Amplitude] <Nrf87
- [Source:]Ce:peak:current <Nrf+>[,Nrf+][,Nrf+]88
- [Source:]Ce:type <CPD88
- [Source:]Ce:ta:r <Nrf+>[,Nrf+][,Nrf+]88
- [Source:]Ce:ta:rl <Nrf+>[,Nrf+][,Nrf+]89
- [Source:]Ce:ta:l <Nrf+>[,Nrf+][,Nrf+]89
- [Source:]Ce:ta:rc <Nrf+>[,Nrf+][,Nrf+]89
- [Source:]Ce:ta:C <Nrf+>[,Nrf+][,Nrf+]90
- [Source:]Ce:ta:l:ainitial <Nrf+>[,Nrf+][,Nrf+]90
- [Source:]Ce:tb:r <Nrf+>[,Nrf+][,Nrf+]90
- [Source:]Ce:tb:rs <Nrf+>[,Nrf+][,Nrf+]91
- [Source:]Ce:tb:l <Nrf+>[,Nrf+][,Nrf+]91
- [Source:]Ce:tb:C <Nrf+>[,Nrf+][,Nrf+]91
- [Source:]Ce:tb:C:vinitial <Nrf+>[,Nrf+][,Nrf+]92
- [Source:]Ce:tb:D:voltage <Nrf+>[,Nrf+][,Nrf+]92
Chapter15 Input Subsystem93
- Input:coupling <CPD93
- Input:phase:loss <STATE93
- Input:line:connection <CPD93
- Input <State94
- Input:rectified[:State] <Boolean94
- Input:integrity <CPD95
- Input:protection:clear95
- Input:protection:wdog[:State] <State95
- Input:protection:wdog:delay <Time96
- Input:regulation:speed <CPD96
- Input:off:mode <CPD96
- Input:on:phase:mode <CPD97
- Input:on:phase:level <Nrf97
- Input:off:phase:mode <CPD98
- Input:off:phase:level <Nrf98
- Input:balance[:State] <Boolean99
Chapter16 ARB Subsystem101
- List:state101
- List:repeat <NR1101
- List:terminate <CPD101
- List:rstate102
- List:recall <String102
- List:step:count103
- List:clear103
- LIST:STEP <Nr1>,<String103
- LIST:STEP:ITEM <Nr1>,<Nr1>,<Nrf105
- LIST:STEP:ITEM? <Nr1>,<Item106
- List:name107
- List:save <Filename107
- List:configure107
- List:create107
- List:file:number107
- LIST:FILE:NAME? <Index108
- List:file:delete <Filename108
- List:step:jump <Nr1108
- List:function <CPD109
- List:DCCV:state <Boolean109
- List:DCCV:voltage <Nrf109
Chapter17 Surgesag Subsystem111
- Surgesag:mode <Mode111
- Surgesag:phase:start <Nrf111
- Surgesag:phase:width <Nrf112
- Surgesag:action <Action112
- Surgesag:symmetry <Bool113
- Surgesag:repeat:count <NR1113
- Surgesag:period:count <NR1114
- Surgesag:value:select <Mode115
- Surgesag:value:percent <Nrf115
- Surgesag:value:setting <Nrf116
- Surgesag:chan:enable <A|B|C|AB|AC|BC|ABC116
- Surgesag:save <String117
- Surgesag:recall <String117
- Surgesag:state117
Chapter18 Waveform Subsystem118
- Waveform[:Immediate] <Waveform>,[Waveform],[Waveform]118
- Pwaveform[:Immediate] <Phase/Chan>,<Waveform119
- Waveform:edit:parameter <Phase/Chan>,<Percent1119
- Waveform:edit:thd:clear120
- Waveform:edit:thd:import <Filename120
- Waveform:edit:thd:formula <Formula121
- Waveform:edit:thd:data <Order>,<String121
- Waveform:edit:thd:save:local <Filename121
- Waveform:edit:thd:save:udisk <Filename122
- Waveform:edit:userdefine:clear122
- Waveform:edit:userdefine:import <Filename122
- Waveform:edit:userdefine:mode <Symmtery123
- Waveform:edit:userdefine:data <Index>,<Normalization123
- Waveform:edit:userdefine:save:local <Filename124
- Waveform:edit:userdefine:save:udisk <Filename124
Chapter19 Sweep Subsystem125
- Sweep:function <Mode125
- Sweep:level:start <Nrf+>[,<Nrf+>,<Nrf+>]125
- Sweep:level:stop <Nrf+>[,<Nrf+>,<Nrf+>]126
- Sweep:level:step <Nrf+>[,<Nrf+>,<Nrf+>]126
- Sweep:time:step <Nrf127
- Sweep:mode <Mode127
- Sweep:waveform <Name128
- Sweep:waveform:parameter <Nrf128
- Sweep:pshift <Nrf129
- Sweep:terminate <Mode129
- Sweep:trig:source <Mode130
- Sweep:step:repeat <NR1130
Chapter20 IEEE-488 Common Commands132
- Cls132
- Ese132
- Ese133
- Esr133
- Idn133
- Opc134
- Rst134
- Sre <Nr1134
- Stb135
- Psc135
- Sav136
- Rcl136

Other manuals for ITech IT8200 Series

User Manual147 pages

Questions and Answers:

Need help?

Do you have a question about the ITech IT8200 Series and is the answer not in the manual?

ITech IT8200 Series Specifications

General

Brand	ITech
Model	IT8200 Series
Category	Measuring Instruments
Language	English

ITech IT8200 Series Programming Guide

Table of Contents

Other manuals for ITech IT8200 Series

Questions and Answers:

ITech IT8200 Series Specifications