ITech IT8200 Series Programming Guide

SCOPe Subsystem
Copyright © ITECH Electronic Co., Ltd. 28
Query syntax
SCOPe:CURRent:SCALe?
Returns
<NRf>
Example
SCOPe:CURRent:SCALe 30
SCOPe:TIMebase:DELay <NRf>
This command is used to set and query the trigger delay of the oscilloscope, unit:
s.
Syntax
SCOPe:TIMebase:DELay <NRf>
Argument
[MINimum|MAXimum]
Query syntax
SCOPe:TIMebase:DELay?
Returns
<NRf>
Example
SCOPe:TIMebase:DELay 3
SCOPe:TRIGger:SOURce
This command is used to set the trigger source of surge/sag function.
Syntax
SCOPe:TRIGger:SOURce
Argument
MANual|BUS|TRIG1|TRIG2
Query syntax
SCOPe:TRIGger:SOURce?
Returns
MANual|BUS|TRIG1|TRIG2

ITech IT8200 Series Specifications

General

Brand	ITech
Model	IT8200 Series
Category	Measuring Instruments
Language	English