ITech IT8200 Series Programming Guide

FETCh & MEASure Subsystem
Copyright © ITECH Electronic Co., Ltd. 39
FETCh[:SCALar]:POWer:PFACtor?
MEASure[:SCALar]:POWer:PFACtor?
This command is used to read the power factor value.
Note: this command parameter is optional. If there is no parameter, it will return
the value of A, B, C three-phase by default.
Syntax:
FETCh[:SCALar]:POWer:PFACtor? [A|B|C]
MEASure[:SCALar]:POWer:PFACtor? [A|B|C]
Arguments
[A|B|C]
Returns:
<NRf>…
Example
FETC:POW:PFAC?
FETCh[:SCALar]:VOLTage[:AC]?
MEASure[:SCALar]:VOLTage[:AC]?
This command is used to read the effective value of voltage.
Note: this command parameter is optional. If there is no parameter, it will return
the value of A, B, C three-phase by default.
Syntax:
FETCh[:SCALar]:VOLTage? [A|B|C]
MEASure[:SCALar]:VOLTage[:AC]? [A|B|C]
Arguments
[A|B|C]
Returns:
<NRf>…
Example
FETC:VOLT?

ITech IT8200 Series Specifications

General

Brand	ITech
Model	IT8200 Series
Category	Measuring Instruments
Language	English