ITech IT8200 Series Programming Guide

WAVEform Subsystem
Copyright © ITECH Electronic Co., Ltd. 102
Syntax:
WAVEform:EDIT:THD:SAVE:LOCal <filename>
Arguments
"filename"
Example
WAVE:EDIT:THD:SAVE:LOC "THD01.csv"
WAVEform:EDIT:THD:SAVE:UDISk <filename>
This command is used to save the presently edited THD wave data to a U disk file,
and specify the file name (if the file name is the same, it is regarded as modifying
the current waveform, if the file name does not exist, it is regarded as creating a
new file)
Syntax:
WAVEform:EDIT:THD:SAVE:UDISk <filename>
Arguments
“filename”
Example
WAVE:EDIT:THD:SAVE:UDIS "THD01.csv"
WAVEform:EDIT:USERdefine:CLEar
This command is used to clear all of userdefined waveform data.
Syntax:
WAVEform:EDIT:USERdefine:CLEar
Example
WAVE:EDIT:USER:CLE
WAVEform:EDIT:USERdefine:IMPort <filename>
This command is used to import the data of the existing custom wave into the
editing memory and query the file name of the imported userdefined wave.
Syntax:
WAVEform:EDIT:USERdefine:IMPort <filename>
Arguments
“filename”
Query syntax:
WAVEform:EDIT:USERdefine:IMPort?

ITech IT8200 Series Specifications

General

Brand	ITech
Model	IT8200 Series
Category	Measuring Instruments
Language	English