ITech IT8200 Series Programming Guide

WAVEform Subsystem
Copyright © ITECH Electronic Co., Ltd. 104
Returns:
<NR2>
Example
WAVE:EDIT:USER:DATA 1,0.5
WAVE:EDIT:USER:DATA? 1
WAVEform:EDIT:USERdefine:SAVE:LOCal <filename>
This command is used to save the presently edited custom wave data to a file,
and specify the file name (if the file name is the same, it is regarded as modifying
the current waveform, if the file name does not exist, it is regarded as creating a
new file).
Syntax:
WAVEform:EDIT:USERdefine:SAVE:LOCal <filename>
Arguments
"filename"
Example
WAVE:EDIT:USER:SAVE:LOC "USER01.csv"
WAVEform:EDIT:USERdefine:SAVE:UDISk <filename>
This command is used to save the presently edited custom waveform data to a
USB disk file, and specify the file name (if the file name is the same, it is regarded
as modifying the current waveform, if the file name does not exist, it is regarded
as creating a new file)
Syntax:
WAVEform:EDIT:USERdefine:SAVE:UDISk <filename>
Arguments
"filename"
Example
WAVE:EDIT:USER:SAVE:UDIS "USER01.csv"

ITech IT8200 Series Specifications

General

Brand	ITech
Model	IT8200 Series
Category	Measuring Instruments
Language	English