ITech IT8200 Series Programming Guide

SCOPe Subsystem
Copyright © ITECH Electronic Co., Ltd. 31
Syntax
SCOPe:RSTate?
Returns
“RUN”|“STOP”|
“SINGle”
Example
SCOPe:RSTate?
SCOPe:WAVeform:DATA?
This command is used to get the data of the oscilloscope.
Syntax
SCOPe:WAVeform:DATA?
Example
SCOPe:WAVeform:DATA?
SCOPe:RANGe:CATalog?
This command is used to get voltage and current scale range options.
Syntax
SCOPe:RANGe:CATalog?
Returns
2/5/10/20/50/100/200/500,0.2/0.5/1/2/5/10/20/50
Example
SCOPe:RANGe:CATalog?
SCOPe:RECord:LENGth <0.6|6|60|600>
Oscilloscope data points collected in one second, 0.6 that is 600 points, 600 that is
600000, with the time scale and sampling frequency, sampling frequency multiplied
by the screen time scale to be less than or equal to the length of the record, such as,
sampling frequency 6s, time scale 1s, the record length is set to 0.6kpts, then the
collection of 100 points per second.
Syntax
SCOPe:RECord:LENGth <0.6|6|60|600>
Returns
<0.6|6|60|600>

ITech IT8200 Series Specifications

General

Brand	ITech
Model	IT8200 Series
Category	Measuring Instruments
Language	English