ITech IT8200 Series Programming Guide

PARallel Subsystem
Copyright © ITECH Electronic Co., Ltd. 24
Chapter10 PARallel Subsystem
PARallel:ROLE <role>
This command sets and queries the power supply to single,
slave or master mode in the parallel operation.
Syntax
PARallel:ROLE <role>
Argument
<CPD>
SINGle|SLAVe|MASTer
Query syntax
PARallel:ROLE?
Returns
SINGle|SLAVe|MASTer
*RST
SINGle
Example
PAR:ROLE SLAV //Set the machine to slave mode.
PAR:ROLE? //Query the parallel role of the present instrument.
PARallel:NUMBer <number>
This command sets and queries the total instrument number in
the parallel operation, and the setting range is 2-16.
Syntax
PARallel:NUMBer <number>
Argument
<NR1>
Query syntax
PARallel:NUMBer?
Returns
<NR1>

ITech IT8200 Series Specifications

General

Brand	ITech
Model	IT8200 Series
Category	Measuring Instruments
Language	English