Notices
© Itech Electronic, Co., Ltd. 2022
No part of this manual may be
reproduced in any form or by any means
(including electronic storage and retrieval
or translation into a foreign language)
without prior permission and written
consent from Itech Electronic, Co., Ltd.
as governed by international copyright
laws.
Manual Part Number
IT8200
Revision
second Edition: AUG.19,
2022
Itech Electronic, Co., Ltd.
Trademarks
Pentium is U.S. registered trademarks of
Intel Corporation.
Microsoft, Visual Studio, Windows and
MS Windows are registered trademarks
of Microsoft Corporation in the United
States and/or other countries and
regions.
Warranty
The materials contained in this
document are provided “as is”, and
is subject to change, without prior
notice, in future editions. Further, to
the maximum extent permitted by
applicable laws, ITECH disclaims all
warrants, either express or implied,
with regard to this manual and any
information contained herein,
including but not limited to the
implied warranties of merchantability
and fitness for a particular purpose.
ITECH shall not be held liable for
errors or for incidental or indirect
damages in connection with the
furnishing, use or application of this
document or of any information
contained herein. Should ITECH and
the user enter into a separate written
agreement with warranty terms
covering the materials in this
document that conflict with these
terms, the warranty terms in the
separate agreement shall prevail.
Technology Licenses
The hardware and/or software described
herein are furnished under a license and
may be used or copied only in
accordance with the terms of such
license.
Restricted Rights Legend
Restricted permissions of the U.S.
government. Permissions for software
and technical data which are authorized
to the U.S. Government only include
those for custom provision to end users.
ITECH follows FAR 12.211 (technical
data), 12.212 (computer software).
DFARS 252.227-7015 (technical
data--commercial products) for national
defense and DFARS 227.7202-3
(permissions for commercial computer
software or computer software
documents) while providing the
customized business licenses of software
and technical data.
Safety Notices
A CAUTION sign denotes a
hazard. It calls attention to an
operating procedure or practice
that, if not correctly performed or
adhered to, could result in
damage to the product or loss of
important data. Do not proceed
beyond a CAUTION sign until
the indicated conditions are fully
understood and met.
A WARNING sign denotes a
hazard. It calls attention to an
operating procedure or practice
that, if not correctly performed or
adhered to,could result in
personal injury or death. Do not
proceed beyond a WARNING
sign until the indicated conditions
are fully understood and met.
NOTE
A NOTE sign denotes
important hint. It calls attention
to tips or supplementary
information that is essential for
users to refer to.
To Next Page
Loading...
Need help?
General
