ITech IT8800 Series Programming Guide

System Commands
Copyright © ITECH Electronic Co., Ltd. 30
Default value
0
Examples
SYST:KEY 1
Query Syntax
SYSTem:KEY?
Returned Parameters
<NR1> (register value)
DISPlay[:WINDow]:MODE
This command is used to set the display mode of the VFD screen. NORMAL
indicates display normally, TEXT indicates text display mode.
Command Syntax
DISPlay[:WINDow]:MODE <CRD>
Parameters
NORMal | TEXT
*RST value
NORMal
Examples
DISP:MODE TEXT
Query Syntax
DISPlay[:WINDow]:MODE?
ReturnedParameters
<CRD>
Related Commands
DISP:TEXT
DISPlay[:WINDow]:TEXT
When VFD is in TEXT display mode, this command is used to display the string
already set.
Command Syntax
DISPlay[:WINDow]:TEXT <NR1>, <SRD>
Examples
DISP:TEXT 0, “HELLO!”
Related Commands
DISP:MODE

ITech IT8800 Series Specifications

General

Brand	ITech
Model	IT8800 Series
Category	Test Equipment
Language	English