ITech IT8800 Series Programming Guide

Measure Commands
Copyright © ITECH Electronic Co., Ltd. 33
Example
FETC:CURR:MIN? might return 1.001, which would be
the measured minimum current across the electronic load
inputs in amperes.
FETCh:POWer[:DC]?
This command returns the last measured input power stored in the communications
buffer of the electronic load. A new measurement is not initiated by this command.
Group
Measurement
Syntax
FETch:POWer[:DC]?
Returns
<NR2> is the measured input power in watt.
Example
FETC:POW? might return 5.01, which would be the
measured power across the electronic load inputs in watt.
FETCh:CAPability?
This command returns the last measured discharging capability stored in the
communications buffer of the electronic load. A new measurement is not initiated by this
command.
Group
Measurement
Syntax
FETch:CAPability?
Returns
<NR2> is the measured input discharging capability in
ampere-hour.
Example
FETC:CAP? might return 5.011, which would be the
measured discharging capability of the electronic load in
ampere-hour.
FETCh:TIME?
This command returns the last measured discharging time stored in the
communications buffer of the electronic load. A new measurement is not initiated by this
command.
Group
Measurement
Syntax
FETch:TIME?
Returns
<NR2> is the measured discharging time in second.
Example
FETC:TIME? might return 5.1, which would be the
measured discharging time of the electronic load in
second.

ITech IT8800 Series Specifications

General

Brand	ITech
Model	IT8800 Series
Category	Test Equipment
Language	English