ITech IT8800 Series Programming Guide

Measure Commands
Copyright © ITECH Electronic Co., Ltd. 36
Returns
<NR2> is the measured input power in watt.
Example
MEAS:POW? might return 5.01, which would be the
measured power across the electronic load inputs in watt.
MEASure:CAPability?
This command initiates and executes a new discharging capability
measurement, and returns the measured input discharging capability of the
electronic load.
Group
Measurement
Syntax
MEASure:CAPability?
Returns
<NR2>is the measured input discharging capability in
ampere-hour.
Example
MEAS:CAP? might return 5.011, which would be the
measured discharging capability of the electronic load in
ampere-hour.
MEASure:TIME?
This command initiates and executes a new discharging time measurement,
and returns the measured input discharging time of the electronic load.
Group
Measurement
Syntax
MEASure:TIME?
Returns
<NR2> is the measured discharging time in second.
Example
MEAS:TIME? might return 5.1, which would be the
measured discharging time of the electronic load in
second.

ITech IT8800 Series Specifications

General

Brand	ITech
Model	IT8800 Series
Category	Test Equipment
Language	English