ITech IT8800 Series Programming Guide

Measure Commands
Copyright © ITECH Electronic Co., Ltd. 35
Group
Measurement
Syntax
MEASure:CURRent[:DC]?
Returns
<NR2> is the measured input current in amperes.
Example
MEAS:CURR? might return 3.001, which would be the
measured current across the electronic load inputs in
amperes.
MEASure:CURRent:MAX?
This command initiates and executes a new maximum current measurement, and
returns the measured input maximum current of the electronic load.
Group
Measurement
Syntax
MEASure:CURRent:MAX?
Returns
<NR2>is the measured input maximum current in
amperes.
Example
MEAS:CURR:MAX? might return 40.001, which would
be the measured maximum current across the electronic
load inputs in amperes.
MEASure:CURRent:MIN?
This command initiates and executes a new minimum current measurement,
and returns the measured input minimum current of the electronic load.
Group
Measurement
Syntax
MEASure:CURRent:MIN?
Returns
<NR2> is the measured input minimum current in
amperes.
Example
MEAS:CURR:MIN? might return 1.001, which would be
the measured minimum current across the electronic load
inputs in amperes.
MEASure:POWer[:DC]?
This command initiates and executes a new power measurement, and returns
the measured input power of the electronic load.
Group
Measurement
Syntax
MEASure:POWer[:DC]?

ITech IT8800 Series Specifications

General

Brand	ITech
Model	IT8800 Series
Category	Test Equipment
Language	English