ITech IT8800 Series Programming Guide

Measure Commands
Copyright © ITECH Electronic Co., Ltd. 32
Example
FETC:VOLT:MIN? might return 1.0011, which would be
the measured minimum voltage across the electronic load
inputs in volts.
FETCh:CURRent[:DC]?
This command returns the last measured input current stored in the
communications buffer of the electronic load. A new measurement is not
initiated by this command.
Group
Measurement
Syntax
FETCh:CURRent[:DC]?
Returns
<NR2> is the measured input current in amperes.
Example
FETC:CURR? might return 3.001, which would be the
measured current across the electronic load inputs in
amperes.
FETCh:CURRent:MAX?
This command returns the last measured input maximum current stored in the
communications buffer of the electronic load. A new measurement is not initiated by this
command.
Group
Measurement
Syntax
FETCh:CURRent:MAX?
Returns
<NR2> is the measured input maximum current in
amperes.
Example
FETC:CURR:MAX? might return 40.001, which would
be the measured maximum current across the electronic
load inputs in amperes.
FETCh:CURRent:MIN?
This command returns the last measured input minimum current stored in the
communications buffer of the electronic load. A new measurement is not initiated by this
command.
Group
Measurement
Syntax
FETCh:CURRent:MIN?
Returns
<NR2> is the measured input minimum current in
amperes.

ITech IT8800 Series Specifications

General

Brand	ITech
Model	IT8800 Series
Category	Test Equipment
Language	English