– 178 –
8. Table of exchanging gauge parts according to sewing specifications
and needle size used
In accordance with the sewing condition, exchange the gauges referring to the following table.
S type when Knit. foundation H type when When thick
delivered. garment delivered needle like MR
#11 to #14 #9 to #11 #14 to #18 #18 to #21 #22 to #25 type is used.
Needle hole guide
B242621000A B242621000C B242621000B B242621000D B242621000G
ø1.6 ø1.6 ø2.0 ø2.4 ø3.0
(For knit) B242621000F (With counter bore)
ø3.0
Inner hook
presser asm.
14103352 14103659 B1817210DAD
Needle guard 1.3 mm Needle guard Needle guard
1.7 mm 1.9 mm
Shuttle
40014964 40061991
Intermediate
presser
40023632 B1601210D0BA B1601210D0CA
ø2.2 ø2.7 ø3.5
Tension controller
No.2 asm.
40010508 40029411
Thread trimmer
lever (small) asm.
B24152800A0
Needle bar
thread guide
B1405210000 40026884
2-hole One hole
Sewing spec.
and needle
size used
Gauge
To Next Page
Loading...
Need help?
General
