JUKI AMS-221EN Series User Manual

– 70 –
(47) Needle thread clamp device connection/disconnection
Procedures of disassembling
1. Remove the hinge screw .
* If the hinge screw cannot be seen from the open part of the needle thread clamp device , try to
move the needle thread clamp connector link by hand in the direction of A or B.
2. Remove the three set screws of the needle thread clamp base and take out the needle thread clamp
device .
Open part
A
B

JUKI AMS-221EN Series Specifications

General

Brand	JUKI
Model	AMS-221EN Series
Category	Sewing Machine
Language	English