– 205 –
11. Error code list
Error code Display Description of error Display message
How to recover Place of recovery
E001 Data is initializes Data is initialized. Turn OFF
(FROM of MAIN CPU) the power
E007 Machine lock Machine is locked. Turn OFF
Main shaft of the sewing machine the power
fails to rotate due to some trouble
E008 Head connector abnormality Undefined head is Turn OFF
Memory of machine head cannot selected. the power
be read.
E010 Pattern No. error Specified pattern does Possible Previous
Pattern No. which is backed up not exist. to re-enter screen
is not registered to data ROM, after reset.
or setting of reading inoperative
is performed.
E011 External media not inserted Media is not inserted. Possible Previous
External media is not inserted. to re-enter screen
after reset.
E012 Read error, external Data cannot be read. Possible Previous
Data read from media cannot to re-start screen
be performed. after reset.
E013 Write error, external Data cannot be written. Possible Previous
Data write from media cannot to re-start screen
be performed. after reset.
E014 Write protect Media is in the write Possible Previous
External media is in the write pohibition state. to re-start screen
prohibition statere-start after after reset.
E015 Format error Formatting is impossible. Possible Previous
Format cannot be performed. to re-start screen
after reset.
E016 External media capacity over Capacity is insufficient. Possible Previous
Capacity of external media is (Media) to re-start screen
short. after reset.
To Next Page
Loading...
Need help?
General
