Keithley 6517A User Manual

E
IEEE-488 Conformance Information
E-1
Information
The IEEE-488.2 standard requires specific information about how the Model 6517A implements the standard. Paragraph 4.9 of
the IEEE-488.2 standard (Std 488.2-1987) lists the documentation requirements. Table E-1 provides a summary of the require-
ments, and provides the information or references the manual for that information.
Table E-1
IEEE-488 documentation requirements
Requirement Description or reference
(1)
(2)
(3)
(4)
(5)
(a)
(b)
(c)
(d)
(e)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
IEEE-488 Interface Function Codes.
Behavior of 6517A when the address is set outside the
range 0-30.
Behavior of 6517A when valid address is entered.
Power-On Setup Conditions.
Message Exchange Options:
Input buffer size.
Queries that return more than one response message
unit.
Queries that generate a response when parsed.
Queries that generate a response when read.
Coupled commands.
Functional elements required for SCPI commands.
Buffer size limitations for block data.
Syntax restrictions.
Response syntax for every query command.
Device-to-device message transfer that does not follow
rules of the standard.
Block data response size.
Common Commands implemented by 6517.
Calibration query information.
Trigger macro for *DDT.
Macro information.
See Appendix B.
Cannot enter an invalid address.
Address changes and bus resets.
Determine by :SYSTem:POSetup (para. 3.22.2).
256 bytes.
None.
All queries (Common Commands and SCPI).
None.
See Table E-2.
Contained in SCPI command subsystems tables (see Tables
3-4 through 3-16).
Block display messages: Top display = 20 characters max,
bottom display = 32 characters max.
See paragraphs 3.10 through 3.25.
See paragraphs 3.10 through 3.25.
None.
See paragraph 3.15.
See paragraph 3.11.
See Service Manual.
Not applicable.
Not applicable.

Keithley 6517A Specifications

General

Brand	Keithley
Model	6517A
Category	Measuring Instruments
Language	English