Driving your vehicle
106
Reduction gear
僅 If you leave the EV button in the ACC
or ON position for a long time, the
battery will discharge.
僅 If you press the EV button without
pressing the brake pedal, the vehicle
will not start and the EV button
changes as follow:
- OFF → ACC → ON → OFF or ACC
僅 If the steering wheel doesn't unlock
properly, the EV button will not work.
Press the EV button while turning the
steering wheel right and left to release
the tension.
僅 You are able to turn off the vehicle
only when the vehicle is not in motion.
僅 If the battery is weak or the smart key
does not work correctly, you can start
the vehicle by pressing the EV button
with the smart key. When you press
the EV button directly with the smart
key, the smart key should contact the
button at a right angle.
僅 When the stop lamp fuse is blown,
you cannot start the vehicle normally.
Replace the fuse with a new one. If it
is not possible, you can start the vehi
-
cle by pressing the EV button for 10
seconds while it is in the ACC position.
The vehicle can start without pressing
the brake pedal. But for your safety
always press the brake pedal before
starting the vehicle.
Reduction gear
Changing gear
Operation
僅 Turn the shift dial.
僅 Press P button to shift to P (Park).
Gear position
The indicator in the instrument cluster
displays the gear position when the EV
button is in ON position.
Automatic shift to P (Park)
Operating condition(s)
僅 The driver door is opened in R
(Reverse), N (Neutral), D (Drive) while
vehicle is in ON position.
僅 The vehicle is in OFF position while
the gear is in R (Reverse), N (Neutral),
D (Drive).
Non-operating condition(s)
僅 When the vehicle is above certain
speed
To Next Page
Loading...
Need help?
General
