Safety features of your vehicle
244
ISOFIX anchorage and top-tether anchorage (ISOFIX
Anchorage System) for children
Do not attempt to install a Child
Restraint System using ISOFIX anchor
-
ages in the rear center seating position.
There are no ISOFIX anchorages pro
-
vided for this seat. Using the outboard
seat anchorages, for the CRS installation
on the rear center seating position, can
damage the anchorages.
Securing a Child Restraint System
with the "ISOFIX Anchorage" sys
-
tem
Operation
僅 Move the seat belt buckle away from
the ISOFIX anchorages.
僅 Move any other objects away from
the anchorages.
僅 Place the Child Restraint System on
the vehicle seat, then attach the seat
to the ISOFIX anchorages according
to the instructions provided by the
Child Restraint System manufacturer.
Take the following precautions when
using the ISOFIX system:
僅 Read and follow all installation
instructions provided with your Child
Restraint System.
僅 To prevent the child from reaching
and taking hold of unretracted seat
belts, buckle all unused rear seat belts
and retract the seat belt webbing
behind the child. Children can be
strangled if a shoulder belt becomes
wrapped around their neck and the
seat belt tightens.
僅 NEVER attach more than one Child
Restraint System to a single anchor
-
age. This could cause the anchor or
attachment to come loose or break.
僅 Always have the ISOFIX (i- Size) sys
-
tem inspected by your dealer after an
accident. An accident can damage the
ISOFIX system and may not properly
secure the Child Restraint System.
Securing a Child Restraint System
with the "Top-tether Anchorage"
system
Type A
Type B
To Next Page
Loading...
Need help?
General
