Driving your vehicle
846
Intelligent Speed Limit Assist (ISLA)
Intelligent Speed Limit Assist set
-
tings
Setting features
Speed limit
A:
Driver assistance
1 Speed limit
2 Speed limit assist
3 Speed limit warning
4 Off
With the vehicle on, select or deselect
Settings
→
Vehicle
→
Driver assis
-
tance
→
Speed limit
from the Settings
menu to set whether or not to use each
function.
僅If
Speed limit Assist
is selected, Intel
-
ligent Speed Limit Assist will inform
the driver of speed limit and addi
-
tional road signs. In addition, Intelli
-
gent Speed Limit Assist will inform the
driver to change set speed of Manual
Speed Limit Assist and/or Smart
Cruise Control to help the driver stay
within the speed limit.
僅If
Speed limit warning
is selected,
Intelligent Speed Limit Assist will
inform the driver of speed limit and
additional road signs. In addition,
Intelligent Speed Limit Assist will warn
the driver when the vehicle is driven
faster than the speed limit. Manual
Speed Limit Assist or Smart Cruise
Control set speed will not be automat
-
ically adjusted. The driver should
adjust the speed manually.
僅If
Off
is selected, Intelligent Speed
Limit Assist will turn off.
Speed limit offset
A:
Driver assistance
1 Speed limit
2 Speed limit offset
(km/h)
With the vehicle on, when
Settings
→
Vehicle
→
Driver assistance
→
Speed
limit
→
Speed limit offset
is selected,
the Speed Limit Offset can be changed.
Speed Limit Warning and Speed Limit
Assist will operate by applying the Speed
Limit Offset setting to the detected
speed limit.
僅 For your safety, change the Settings
after parking the vehicle at a safe
location.
僅 Speed Limit Assist function operates
based on the Offset setting added to
the speed limit. If you want to change
the set speed according to the speed
limit, set the offset to
0
.
僅 Speed Limit Warning function warns
the driver when driving speed
exceeds the speed at which the set
Offset is added to speed limit. If you
want Speed Limit Warning to warn
you immediately when the driving
speed exceeds the speed limit, set the
offset to
0
.