25
2
2
Electric vehicle guide AC charge
Checking charging status
When charging the high voltage battery,
the charge level can be checked from
outside the vehicle.
For more details, refer to "Charge indica
-
tor lamp for electric vehicle" on page 2-
19.
How to disconnect AC charger
1. When charging is complete, remove
the charging plug from the electrical
outlet of the AC charging station.
2. Hold the charging connector handle
and pull it out.
3. Make sure to completely close the
charging door.
4. Close the protection caps of the
charging connector and the charging
plug to protect them from foreign
substances.
5. If the personal charging connector is
used, store the connector in the cable
compartment.
僅 If you cannot open the charging door
due to freezing weather, tap lightly or
remove any ice near the charging
door. Do not try to forcibly open the
charging door.
僅Locking Charging Cable Select
Set
-
tings
→
Vehicle
→
ECO Vehicle
→
Charging connector locking mode
in the infotainment. The charging con
-
nector is locked in the inlet at a differ
-
ent period according to which mode is
selected.
-
Always lock
mode: The connector
locks when the charging connector
is plugged into the charging inlet.
-
Lock while charging
mode: The
connector locks when charging
starts.
僅 Even though charging is possible with
the EV button in the ON/START posi
-
tion, for you safety, start charging
when the EV button is in the OFF posi
-
tion and the vehicle shifted to P
(Park). After charging has started, you
can use electrical components such as
the radio by pressing the EV button to
the ACC or ON position.
僅 During AC charging, the radio recep
-
tion may be bad.
僅 During charging, the gear cannot be
shifted from P (Park) to any other
gear.
僅 Depending on the condition and dura
-
bility of the high voltage battery, char
-
ger specifications, and ambient
temperature, the time required for
charging the battery may vary.
To Next Page
Loading...
Need help?
General
