13
7
7
What to do in an emergency If you have a flat tire (with Tire Mobility Kit)
Safe use of the Tire Mobility Kit
僅 Stop the vehicle in a safe, level place
away from traffic.
僅 Set the parking brake.
僅 Only use the Tire Mobility Kit for seal
-
ing/inflating passenger vehicle tires.
僅 Do not remove any foreign objects
from the tire.
僅 Read the precautionary advice
printed on the sealant bottle before
using the Tire Mobility Kit.
僅 Leave the vehicle running. Operating
the Tire Mobility Kit may drain the
battery.
僅 Never leave the Tire Mobility Kit unat
-
tended while it is being used.
僅 Do not leave the compressor running
for more than approximately 10 min
-
utes at a time or it may overheat.
僅 Do not use the Tire Mobility Kit if the
ambient temperature is below -30 °C
(-22 °F).
僅 Do not use the Tire Mobility Kit if the
tire and wheel are damaged.
Technical Data
僅 System voltage: DC 12 V
僅 Working voltage: DC 12 V
僅 Amperage rating: max. 15 A
僅 Suitable temperatures: -30 to 70 °C (-
22 to 158 °F)
僅 Max. working pressure: 7 bar (101 psi)
僅Size
- Compressor: 150 x 130 x 60 mm
(5.9 x 5.1 x 2.4 inches)
- Sealant bottle: 115.3 x 87.3 ø mm
(4.5 x 3.4 ø inches)
- Compressor weight: 620 g (1.36
lbs.)
- Sealant volume: 400 ml (24.4 cu.
in)
* Sealant and spare parts can be
obtained and replaced at an autho
-
rized vehicle or tire dealer. Empty seal
-
ant bottles may be disposed of at
home. Liquid residue from the sealant
should be disposed of by your vehicle
or tire dealer or in accordance with
local waste disposal regulations.
To Next Page
Loading...
Need help?
General
