15
4
4
Features of your vehicle Theft-alarm system
alarm with blinking of the hazard
warning lights.
Armed stage
Using the smart key
Park the vehicle and stop the
engine. Arm the system as
described below.
1. Turn off the engine.
2. Make sure that all doors (and tail
-
gate) and the engine bonnet are
closed and latched.
3. Do one of following:
䳜 Lock the doors by pressing the
button of the front outside
door handle with the smart key
in your possession.
After completion of the steps
above, the hazard warning
lights operate once to indicate
that the system is armed.
If any door remains open, the
doors won't lock and the chime
will sound for 3 seconds. Close
the door and try again to lock
the doors.
If tailgate or engine bonnet
remains open, the hazard
warning lights won't operate
and theft-alarm will not arm.
After this, if the tailgate and
engine bonnet are closed, the
hazard warning lights will blink
once.
䳜 Lock the doors by pressing the
lock button on the smart key.
After completion of the steps
above, the hazard warning
lights will operate once to indi
-
cate that the system is armed.
If any door (and tailgate) or
engine bonnet remains open,
the hazard warning lights won't
operate and theft-alarm will
not arm. After this, if all doors
(and tailgate) and engine
bonnet are closed, the hazard
warning lights blink once.
Using the transmitter
Park the vehicle and stop the
engine. Arm the system as
described below.
1. Turn off the engine and remove
the ignition key from the ignition
switch.
2. Make sure that all doors (and tail
-
gate), the engine bonnet are
closed and latched.
3. Lock the doors by pressing the
lock button on the transmitter.
After completion of the steps
above, the hazard warning lights
will blink once to indicate that the
system is armed.
If any door (and tailgate) or
engine bonnet remains open, the
hazard warning lights won't oper
-
ate and theft-alarm will not arm.
After this, if all doors (and tail
-
gate) and engine bonnet are
closed, the hazard warning lights
blink once.