Driving your vehicle
1446
Rear Cross-Traffic Collision-Avoidance Assist
(RCCA)
System settings
Setting functions for the system
Rear Cross-Traffic Safety
With the ignition switch or ENGINE
START/STOP button in the ON posi
-
tion, select 'Driver Assistance →
Parking Safety → Rear Cross-Traffic
Safety' from the Settings menu to
turn on Rear Cross-Traffic Safety
and deselect to turn off the func
-
tion.
When the engine is restarted, rear
Cross-Traffic Safety will always
turn on. However, if 'Off' is selected
after the engine is restarted, the
driver should always be aware of
the surroundings and drive safely.
䳜 Settings for Rear Cross-Traffic
Safety include Rear Cross-Traffic
Collision Warning and Rear Cross-
Traffic Collision-Avoidance Assist.
䳜 If the ignition switch or ENGINE
START/STOP button is changed to
the ON position, rear Cross-Traf
-
fic Safety will always turn on.
Warning Timing
With the ignition switch or ENGINE
START/STOP button in the ON posi
-
tion, select 'Driver Assistance →
Warning Timing' from the Settings
menu to change the initial warning
activation time for Rear Cross-Traf
-
fic Safety.
When the vehicle is first delivered,
warning timing is set to Normal. If
you change the warning timing, the
warning time of other Driver Assist
systems may change.
Always be aware before changing
the warning timing.