Driving your vehicle
1186
Smart Cruise Control (SCC)
- When driving in heavy traffic or
when traffic conditions make it
difficult to drive at a constant
speed
- When the vehicle sensing ability
decreases due to vehicle modi
-
fication resulting level differ
-
ence of the vehicle's front and
rear
- When driving with limited view
(possibly due to bad weather,
such as fog, snow, rain or sand
-
storm)
䳜 Pay particular attention to the
driving conditions whenever using
Smart Cruise Control.
䳜 Smart Cruise Control is not a sub
-
stitute for safe driving. It is the
responsibility of the driver to
always check the speed and dis
-
tance of the vehicle ahead.
䳜 Be careful when driving downhill
using SCC.
䳜 Limited visibility (rain, snow,
smog, etc.)
䳜 Cruise function should not be
used when the vehicle is being
towed to prevent any damage.
䳜 Always set the vehicle speed
under the speed limit in your
country.
䳜 Unexpected situations may lead
to possible accidents. Pay atten
-
tion continuously to road condi
-
tions and driving even when
Smart Cruise Control system is
being operated.
System settings
Setting functions for the system
Type A
Type B
1.
Press the Driving Assist button
to turn the system on. The
CRUISE indicator in the instru
-
ment cluster will illuminate.
2. Accelerate to the desired speed.
Smart Cruise Control speed can be
set as follows:
䳜 Move down the SET- switch
and hold it. Your vehicle set
speed is below 10 km/h (5 mph)
and over 180 km/h
To Next Page
Loading...
Need help?
General
