Features of your vehicle
1544
Windscreen defrosting and defogging
speed is adjusted to a higher fan
speed.
To defrost outside windscreen
1. Set the fan speed to the highest
(extreme right) position.
2. Set the temperature to the
extreme hot (HI) position.
3. Press the defrost button ( ).
4. The air conditioning will be turned
on according to the detected
ambient temperature and out
-
side (fresh) air position will be
selected automatically.
If the position is selected, lower
fan speed is adjusted to a higher fan
speed.
Defogging logic (if equipped)
To reduce the possibility of fogging
up the inside of the windscreen, the
air intake or air conditioning are
controlled automatically according
to certain conditions such as or
position. To cancel or return to
the defogging logic, do the following.
Manual climate control system
1. Turn the ignition switch to the ON
position.
2. Turn the mode selection knob to
the defrost position ( ).
3. Push the air intake control button
at least 5 times within 3 seconds.
The indicator light in the air intake
control button will blink 3 times. It
indicates that the defogging logic is
cancelled or returned to the pro
-
grammed status.
If the battery has been discharged
or disconnected, it resets to the
defog logic status.
To Next Page
Loading...
Need help?
General
