115
4
4
Features of your vehicle Lighting
Type D
Type E
The ignition switch must be on for
the turn signals to function. To turn
on the turn signals, move the lever
up or down (A).
The green arrow indicators on the
instrument panel indicate which
turn signal is operating. They will
selfcancel after a turn is completed.
If the indicator continues to flash
after a turn, manually return the
lever to the O (OFF) position.
To signal a lane change, move the
turn signal lever slightly and hold it
in position (B). The lever will return
to the O (OFF) position when
released.
If an indicator stays on and does not
flash or if it flashes abnormally, one
of the turn signal bulbs may be
burned out and will require replace
-
ment.
One-touch lane change function
To activate an one-touch lane
change function, move the turn sig
-
nal lever slightly and then release it.
The lane change signals will blink 3
times.
If an indicator flash is abnormally
quick or slow, a bulb may be burned
out or have a poor electrical conne
tion in the circuit.
Front fog light (if equipped)
Type A,B
To Next Page
Loading...
Need help?
General
