Features of your vehicle
324
Bonnet
3. Pull the support rod.
4. Hold the bonnet open with the
support rod.
Hot parts
Grasp the support rod in the area
wrapped in rubber. The rubber will
help prevent you from being burned
by hot metal when the engine is hot.
Bonnet open warning (if equipped)
The warning message will appear on
the LCD display when bonnet is
open.
The warning chime will operate
when the vehicle is being driven at
or above 3 km/h (2 mph) with the
bonnet open.
Closing the bonnet
1. Before closing the bonnet, check
the following:
䳜 All filler caps in engine com
-
partment must be correctly
installed.
䳜 Gloves, rags or any other com
-
bustible material must be
removed from the engine com
-
partment.
2. Return the support rod to its clip
to prevent it from rattling.
3. Lower the bonnet until it is about
30 cm above the closed position
and let it drop. Make sure that it
locks into place.
To Next Page
Loading...
Need help?
General
