107
8
8
Maintenance Light bulbs
1. Using a flat-blade screwdriver,
gently pry the lamp assembly
from interior.
2. Remove the bulb by pulling it
straight out.
3. Install a new bulb in the socket.
4. Install the lamp assembly to inte
-
rior.
Be careful not to dirty or damage
the lens, lens tab, and plastic hous
-
ings.
Room lamp (Bulb type) bulb
replacement
Prior to working on the Interior
lamps, ensure that the ä³–OFFä³— button
is depressed to avoid burning your
fingers or receiving an electric
shock.
1. Using a flat-blade screwdriver,
gently pry the lens cover from
lamp housing.
2. Remove the bulb by pulling it
straight out.
3. Install a new bulb in the socket.
4. Align the lens cover tabs with the
lamp housing notches and snap
the lens into place.
Be careful not to dirty or damage
the lens, lens tab, and plastic hous
-
ings.
Glove box lamp (Bulb type) bulb
replacement
1. Using a flat-blade screwdriver,
gently pry the lamp assembly
from interior.
2. Remove the bulb by pulling it
straight out.
3. Install a new bulb in the socket.
4. Install the lamp assembly to inte
-
rior.
To Next Page
Loading...
Need help?
General
