105
8
8
Maintenance Light bulbs
with the slots in the assembly.
Push the socket into the assem
-
bly and turn the socket clockwise.
7. Install the service cover by putting
it into the service hole.
Rear fog lamp (LED type) bulb
replacement
If the rear fog lamp (LED) (1), does
not operate, have your vehicle
checked by a professional workshop.
Kia recommends to visit an
authorised Kia dealer/service part
-
ner.The LED lamps cannot be
replaced as a single unit because it is
an integrated unit. The LED lamps
has to be replaced with the unit.A
skilled technician should check or
repair the rear fog lamp (LED), for it
may damage related parts of the
vehicle.
High mounted stop lamp (Bulb
type) bulb replacement
If the high mounted stop lamp (1)
does not operate, have your vehicle
checked by a professional workshop.
Kia recommends to visit an
authorised Kia dealer/service part
-
ner.
License plate lamp (Bulb type) bulb
replacement
1. Using a flat-blade screwdriver,
gently pry the lens cover from
lamp housing.
2. Remove the socket from the
assembly by turning the socket
To Next Page
Loading...
Need help?
General
