Kia Stonic User Manual

83
6
6
Driving your vehicle Lane Keeping Assist (LKA)
Turning the function ON/OFF
To activate/deactivate LKA :
With ignition switch or ENGINE
START/STOP button in the ON posi
-
tion, press and hold the Lane Safety
button ( ) located on the instru
-
ment panel to turn on Lane Keeping
Assist.
The indicator ( ) in the cluster
display will initially illuminate white.
If you press and hold the Lane Driv
-
ing Assist button located on the
steering wheel, LKA will be turned
off and the indicator on the cluster
display will go off.
The colour of indicator will change
depend on the condition of LKA.
䳜 White : Sensor does not detect
the lane marker or vehicle speed
is less than 60 km/h (37 mph).
䳜 Green : Sensor detects the lane
marker and system is able to con
-
trol the steering.
LKA function change
The driver can change LKA to Lane
Departure Warning (LDW) or
change LKA mode selecting on the
LCD display 䳖User settings →
Driver Assistance → Lane Safety
→ Lane Keeping Assist/LaneDe
-
parture Warning/Off䳗
Lane Keeping Assist
LKA mode guides the driver to
keep the vehicle within the lanes.
It rarely controls the steering
wheel, when the vehicle drives well
inside the lanes. However, it starts
to control the steering wheel,
when the vehicle is about to devi
-
ate from the lanes.
Lane Departure Warning
LDW alerts the driver with a visual
and acoustic warning when the
function detects the vehicle leaving
the lane. In this mode, the steering
wheel will not be controlled. When
the vehicle䳓s front wheel contacts
the inside edge of lane line, the con
-
tacted line will be displayed on the
LCD display.
Off
If you select 䳒Off䳓, it is the same with
pressing and holding Lane Driving
Assist button ( ) on the steering
wheel.
OJA050065

Kia Stonic Specifications

General

Brand	Kia
Model	Stonic
Category	Automobile
Language	English