Kia Stonic User Manual

Driving your vehicle
206
Idle Stop and Go (ISG) system
bonnet) in auto stop mode at
standstill, ISG system will be
deactivated.
Auto start
To restart the engine from idle stop
mode (Excluding : Mild Hybrid Elec
-
tric Vehicle)
Manual Transmission/Intelligent
Manual Transmission
Vehicle which is equipped manual
transmission is available two version
of restart.
䳜 Conventional restart
- Press the clutch pedal when the
shift lever is in the N (Neutral)
position.
䳜 Late restart (if equipped)
- Depress the clutch pedal
- Engage the gear
- Release the brake pedal
NOTICE
䳜 Late restart function is only oper
-
ated when it is on a level ground
and the vehicle is stable.
䳜 To start the engine when the
brake is not pressed or the gear
is already engaged, for safety
press the brake pedal first and
then press the clutch pedal.
䳜 To turn on the engine without
vehicle movement with the brake
pedal pressed, (only with Late
Restart)
1. Press and release the clutch
pedal
2. Press the clutch pedal again
immediately
䳜 After the vehicle stalled, the
engine starts if you operate as
shown below
1. Release the clutch pedal, after
the engine completely stop
2. Depress the clutch pedal
Automatic Transmission/Dual
Clutch Transmission
䳜 Release the brake pedal
The engine will start and the green
AUTO STOP indicator ( ) on the
instrument cluster will go out.
To restart the engine from idle stop
mode (Mild Hybrid Electric Vehicle)
Manual Transmission/Intelligent
Manual Transmission
䳜 Before standstill
- Press the clutch pedal if the
clutch pedal has not pressed.
- If the clutch pedal has already
pressed, release the brake
pedal or move the gear to a
position other than N position.
䳜 After standstill
- If the clutch pedal has already
pressed, release the brake
pedal or move the gear to a
position other than N position. If

Kia Stonic Specifications

General

Brand	Kia
Model	Stonic
Category	Automobile
Language	English