INTRODUCTION
0-6 WB140-2N, WB150-2N
PRODUCT IDENTIFICATION
The serial numbers and model numbers on the components are the only numbers that your dealer will need when requiring
assistance or ordering replacement parts. It is a good idea to record this information in this manual on page 0-9 (Serial Number
and Dealer Information). All views indicated below are viewed from the operators position.
MACHINE SERIAL NUMBER
The machine serial number is stamped on the right side of the front
part of the main tractor frame.
MACHINE IDENTIFICATION PLATE
The Komatsu backhoe loaders described in this manual are provided
with the “CE” mark which certifies that they are in compliance with the
CE standards.
The identification plate is located inside the operators cab on the left
vertical wall of the frame, behind the brake pedals.
To Next Page
Loading...
Need help?
General
