OPTIONAL ATTACHMENTS
WB140-2N, WB150-2N 5-15
4. To facilitate the sliding of the tool on its seat, check the thrust direc-
tion and always correct the hitting position of the hammer by using
the bucket and arm control.
Remark
Do not use the demolition hammer with the bucket cylinder at
the end of its stroke, always leave a minimum space of 5 cm
(2 in)
5. Always be sure the arm at its optimal position to avoid harmful or
useless strokes.
ALWAYS AVOID THE FOLLOWING USES:
Gathering or moving materials with the demolition hammer.
Rotating the boom while using the hammer
Remark
Remember the power in the backhoe unit is the breakout fea-
ture when using this tool. Do not use the backhoe unit to
reposition or swing the machine to the left or right. Doing so
will damage the swing cylinders or possibly tip the machine
over.
To Next Page
Loading...
Need help?
General
