OPERATION
WB140-2N, WB150-2N 2-53
EMERGENCY RECOVERY
The machine is equipped with emergency recovery hooks for emergency recovery only. The machine is not designed to be
towed in any manor especially by the loader or backhoe unit. These hooks are only for temporary use to get the machine into a
secure area so the proper repairs can be made.
HOW TO MOVE THE MACHINE
If the machine gets stuck, breaks down or runs out of fuel and cannot be
removed using its only power, it is important to follow some simple pro-
cedures
Place all the controls in neutral and disengage the four-wheel drive sys-
tem before moving the machine.
Using the recovery hooks and towing cable rated at F=6200 dN (13938
lb.) tow the machine just far enough to carry our essential repairs.
Never tow the machine at an angle, always tow the machine in a straight
line.
Be sure the tow cables are the same length when towing.
Never stand next to the tow lines then towing the machine.
The cable or chain could brake causing injury. Always stay
clear of towing equipment.
To Next Page
Loading...
Need help?
General
