CONTROLS 13
– Press the button for 3 - 5 seconds.
The settings are stored and the Setup menu is closed.
Info
If no button is pressed for 20 seconds, or if no impulse comes from the
wheel speed sensor, the settings are automatically saved and the Setup
menu is closed.
4.15Setting the clock
Condition
The motorcycle is stationary.
400330-01
– Press the button briefly and repeatedly until CLK appears at the bottom right of
the display.
– Press the button for 3 - 5 seconds.
The hour display flashes.
– Set the hour display with the button and/or button .
– Press the button briefly.
The next segment of the display flashes and can be set.
– You can set the following segments in the same way as the hours by pressing the
button and the button .
Info
The seconds can only be set to zero.
– Press the button for 3 - 5 seconds.
The settings are stored and the Setup menu is closed.
Info
If no button is pressed for 20 seconds, or if a pulse arrives from the wheel
speed sensor, the settings are stored automatically and the Setup menu is
closed.
4.16Adjusting the speedometer functions
Info
When the vehicle is delivered, only the SPEED/H and SPEED/ODO display modes are activated.
Condition
The motorcycle is stationary.
400318-01
– Press the button briefly and repeatedly until H appears at the bottom right of the
display.
– Press the button for 3 - 5 seconds.
The Setup menu is displayed and the activated functions are shown.
– Change to the desired function by pressing the button briefly.
The selected function flashes.
Activating a function
– Press the button .
The symbol remains on the screen and the display changes to the next
function.
Deactivating the function
– Press the button .
The symbol on the screen goes out and the display changes to the next
function.
– All desired functions are activated or deactivated accordingly.
– Press the button for 3 - 5 seconds.
The settings are stored and the Setup menu is closed.
To Next Page
Loading...
Need help?
General
