SERVICE WORK ON THE ENGINE 80
601324-10
– Fill the oil filter housing with oil and wait until air bubbles stop rising.
Engine oil (SAE 10W/60) (00062010035) ( p. 114)
Engine oil (SAE 10W/50) ( p. 114)
601325-10
– Position the upper oil filter cover. Mount and tighten screws .
Guideline
Screw, oil filter cover M5 6 Nm (4.4 lbf ft)
– Wipe away excess engine oil.
601326-10
– Remove the oil filler plug on the clutch cover and fill up with engine oil.
Engine oil
Oil change 1.20 l (1.27 qt.) Engine oil (SAE
10W/60) (00062010035) ( p. 114)
Engine oil (SAE 10W/50) ( p. 114)
Info
Too little engine oil or poor-quality engine oil results in premature wear to
the engine.
– Mount and tighten the oil filler plug.
Danger
Danger of poisoning Exhaust gases are poisonous and inhaling them may
result in unconsciousness and/or death.
– When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
– Start the engine and check that it is oil-tight.
– Check the engine oil level. ( p. 78)
15.3Adding engine oil
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
601326-10
– Remove the oil filler plug on the clutch cover and fill up with engine oil.
Engine oil (SAE 10W/60) (00062010035) ( p. 114)
Engine oil (SAE 10W/50) ( p. 114)
Info
For optimal performance of the engine oil, do not mix different types of
engine oil.
We recommend making an oil change in this case.
– Mount and tighten the oil filler plug.
To Next Page
Loading...
Need help?
General
