MAINTENANCE ON CHASSIS AND ENGINE 106
» If the brake disc thickness is less than the specified value:
– Change the brake disc.
– Check the front and rear brake discs for damage, cracking and deformation.
» If the brake disc exhibits damage, cracking or deformation:
– Change the brake disc.
9.30Checking the free travel of the hand brake lever
Warning
Danger of accidents Brake system failure.
– If there is no free travel on the hand brake lever, pressure builds up in the front brake circuit. The front brake can fail due to
overheating. Adjust free travel on hand brake lever according to specifications.
601088-01
– Push the hand brake lever forward and check free travel .
Free travel of hand brake lever ≥ 3 mm (≥ 0.12 in)
» If the free travel does not meet specifications:
– Adjust the basic position of hand brake lever. ( p. 107)
To Next Page
Loading...
Need help?
General
