CONTROLS 33
Condition
The vehicle is stationary.
400321-01
– Press the button briefly and repeatedly until LAP appears at the bottom right of the
display.
– Press the button briefly.
LAP 1 appears on the left side of the display.
– Laps 1-10 can be displayed by pressing the button .
– The button has no function
– Press the button briefly.
Next display mode
Info
If an impulse is received from the wheel speed sensor, the left side of the dis-
play changes back to the SPEED mode.
5.22Display mode SPEED (speed)
400317-02
– Press the button briefly and repeatedly until SPEED appears on the left side of the
display.
The current speed is displayed in the SPEED display mode.
The current speed can be displayed in Km/h or Mph.
Info
Making the setting according to the country.
When an impulse comes from the front wheel, the left side of the speedometer dis-
play changes to the SPEED mode and the current speed is shown.
To Next Page
Loading...
Need help?
General
