MAINTENANCE ON CHASSIS AND ENGINE 168
600134-11
– Fit oil drain plug with the seal ring and tighten it.
Guideline
Oil drain plug with magnet M12x1.5 20 Nm
(14.8 lbf ft)
– Install the engine guard. ( p. 146)
9.86Removing the oil filter x
Warning
Danger of scalding Engine oil and gear oil get very hot when the vehicle is driven.
– Wear suitable protective clothing and gloves. If you scald yourself, hold the affected area under lukewarm water immediately.
Warning
Environmental hazard Hazardous substances cause environmental damage.
– Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
– Place a suitable container under the engine.
To Next Page
Loading...
Need help?
General
