RIDING INSTRUCTIONS 51
7.1Checks before putting into operation
Info
Make sure that the vehicle is roadworthy before use.
Info
In the interests of riding safety, make a habit of making a general check before you ride.
– Check the engine oil level. ( p. 163)
– Check the engine for oil loss.
– Check the fuel supply.
– Check the chain tension. ( p. 100)
– Check the chain dirt accumulation. ( p. 99)
– Check the tire condition. ( p. 127)
– Check the tire air pressure. ( p. 128)
– Check the front brake fluid level. ( p. 107)
– Check the rear brake fluid level. ( p. 117)
– Check the front brake linings. ( p. 110)
– Check the rear brake linings. ( p. 120)
– Check brake system function.
– Check that the rear hubs are tight.
– Check that the footrests are tight.
– Check the handlebar bridge bearing for excessive play.
– Check the handlebar for smooth operation and play.
– Check the coolant level. ( p. 154)
– Check the cooling system for leakage.
To Next Page
Loading...
Need help?
General
