MAINTENANCE ON CHASSIS AND ENGINE 170
9.87Installing the oil filter x
600147-10
– Fill oil filters and with engine oil and insert them in the oil filter housing.
600137-10
– Oil the O-rings of the oil filter covers and mount them with the oil filter covers. Mount
and tighten screws and .
Guideline
Screw, oil filter cover M5 6 Nm (4.4 lbf ft)
– Connect ground cable on the engine and tighten the screw.
Guideline
Screw, starter engine M6 10 Nm (7.4 lbf ft)
9.88Filling up with engine oil x
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
To Next Page
Loading...
Need help?
General
