CONTROLS 32
400318-01
– Press the button briefly and repeatedly until H appears at the bottom right of the dis-
play.
– Press the button for 3 - 5 seconds.
The Setup menu is displayed and the activated functions are shown.
– Change to the desired function by pressing the button briefly.
The selected function flashes.
Activating a function
– Press the button .
The symbol remains on the screen and the display changes to the next func-
tion.
Deactivating the function
– Press the button .
The symbol on the screen goes out and the display changes to the next func-
tion.
– All desired functions are activated or deactivated accordingly.
– Press the button for 3 - 5 seconds.
The settings are stored and the Setup menu is closed.
Info
If no button is pressed for 20 seconds, or if a pulse arrives from the wheel speed
sensor, the settings are stored automatically and the Setup menu is closed.
5.21Querying the lap time
Info
This function can be called only if lap times are measured.
To Next Page
Loading...
Need help?
General
