SERVICE SCHEDULE 69
S3N S15A S30A
Wheels Check the chain tension. ( p. 100) • • •
Clean the chain. ( p. 99) • • •
Check the front wheel bearing for play. • • •
S3N: Once after 3 operating hours
S15A: Every 15 operating hours
S30A: Every 30 operating hours
8.2Important maintenance work to be carried out by an authorized KTM workshop (as an additional order)
S30A S40A S60A S80A S90A S160A J1A
Change the oil in the front shock absorber. x
• •
Service the front shock absorber. x
•
Change the oil in the rear shock absorber. x
• • •
Service the rear shock absorber. x
• •
Clean and adjust carburetor. •
Treat electric contacts with contact spray. •
Change hydraulic clutch fluid. •
Change brake fluid. •
Clean spark arrestor. •
Check for wear on the clutch discs. • • •
Check the length of the clutch springs. •
Check the clutch slave cylinder for dents. •
Check the outer clutch hub for dents. •
Check the cylinder and piston for wear. •
Check for camshaft wear. (visual check) •
To Next Page
Loading...
Need help?
General
